Product Description
Ubiquiti UAP-nanoHD Unifi nanoHD 802.11ac 2.4/5GHz Wave2
Ubiquiti UniFi nanoHD is a 4×4 MU-MIMO 802.11ac Wave2 Access Point. It runs on 2.4 GHz (300Mbps max PHY rate), 4×4 MU-MIMO on 5GHz (1733Mbps max PHY rate). It also comes with the same mount as the UAP-AC-Lite. It combines the performance increase from MU-MIMO technology and the use of 4×4 spatial streams, the UniFi nano HD AP delivers up to 125x greater performance than a typical Wave 1AP
| UAP-HD-NANO | |
|---|---|
| Dimensions | 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29″) |
| Weight With Mounting Kits |
300 g (10.6 oz) 315 g (11.1 oz) |
| Networking Interface | (1) RJ45 GbE |
| Buttons | (1) Reset to Defaults |
| Power Method | 802.3af |
| Power Supply | UniFi Switch (PoE) |
| Max. Power Consumption | 10.5W |
| Operating Frequency | 2.4 GHz 5 GHz |
| Max. TX Power 2.4 GHz 5 GHz |
23 dBm 26 dBm |
| Antenna Gain 2.4 GHz 5 GHz |
2.8 dBi 3 dBi |
| MIMO 2.4 GHz 5 GHz |
2×2 4×4 |
| Throughput 2.4GHz 5GHz |
300 Mbps 1733 Mbps |
| Wi-Fi Standards | 802.11 a/b/g/n/ac/ac-wave2 |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| BSSID | 8 per Radio |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
There are no reviews yet.